SPI LED Controller

SPI LED Controller

SKU: ControllerSPI

Smallest stand-alone digital LED controller. A single device can handle 1024 RGB or 768 RGBW pixels.


Effects and shows can be created in our LED Strip Studio Software and easily uploaded to Micro SD card. Store up to 255 effects and trigger them using hardware buttons or DMX.

  • Advance Features

    SPI LED Controller supports most common connectors such as 2 x RJ-45 and one SPI connector (2EDGK) for your LEDs. You can also find a slot for SD-Card and buttons for control in stand-alone mode.


    SPI LED Controller offers several DMX modes


    1. DMX pixel mode, where each LED pixel can be created with one or several LEDs.

    2. DMX Trigger mode (SD-Card), where you can use DMX as trigger stored animations on SD-Card.


    SPI LED Controller to use RJ-45 connectors as DMX in and DMX out. Complete scheme how to make an adapter from RJ-45 to 3 pin XLR in/out you can find in the user manual.

  • Technical specification

    Weight 53 g
    Dimensions 90 × 56 × 23 mm
    Maximum of LEDs


    SPI LED Outputs


    Maximum of LEDs per Output


    Required power

    5-24V/ 0.3A (PCB only, wihout the LED strips / LED pixels)

    Pass-Thru Current


    Power connector

    pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY

    SPI OUT connector

    pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY

    DMX input connector


    DMX output connector


    SD Card

    Micro SD Card (FAT32, up to 32GB)

  • Category

    Pixel Controller

  • Tags

    Art-Net, Digital Controller, Led Controller, LSS Software License, Pixel Controller, RGB, RGBW