Pixel Upgrade – SPI Matrix

SKU: UPpixelMatrix1024to2048

Upgrade pixel level and use more pixels with a single LED controller.

Maximum pixel level is 4096 RGB LEDs per each LED controller.

 

You can do the upgrade in pixel levels / Art-Net universes:

  • Level – SPI Matrix 1024 RGB pixels (7 Art-Net universes)
  • Level – SPI Matrix 2048 RGB pixels (14 Art-Net universes)
  • Level – SPI Matrix 4096 RGB pixels (28 Art-Net universes)
  • Advance Features

    SPI Matrix can be controlled by Art-Net, DMX or can be operated by its stand-alone mode. Maximum of programmable RGB / RGBW LEDs is 4096 RGB / 3072 RGBW LEDs. There are 4 SPI LEDs outputs. Maximum of RGB LEDs per Output is 1024/768.

     

    Required Input is 5-24V/ 0.3A (PCB only, without the LED strips / LED pixels) and maximal current is 10 A. Power connector and SPI out connector is standard 4 pin terminal with 5mm contact spacing e.g. SH04-5-GYLED.

     

    SPI Matrix supports most common connectors such as RJ-45, XLR in/out and SPIconnectors for your LEDs. You can also find a slot for SD-Card, DIP switch and buttons for control in stand-alone mode. Optimal SD card is Micro SD Card (FAT32, up to 32 GB).

     

    LED Strip Studio software license is not included with SPI Matrix, but you can use to control third-party art-net hardware and software. In case you like to upgrade SPI Matrix on LED Ethernet Controller contact our support team.

€150,00Price
Size
 

©2019 by GABS SYSTEMS LTD